Titanium dioxide powder is used for the production of inks, plastics, textiles, , materials in factory, site and plant situations The system requirements are a source of compressed gas, usually air, a feed device, a conveying pipeline and a receiver to disengage the conveyed material and carrier gas The system is totally enclosed, and if it ....

materials When difficult material, Titanium Dioxide for instance, builds up in the line, agitator devices easily break materials free The primary challenge with conveying difficult powder is more commonly getting material to feed at a constant rate into the material line from the pick-up point and then again getting powder to discharge from the...

Understanding dense-phase conveying I n the world of pneumatic con-veying, there are two system types dilute- and dense-phase conveying Dilute-phase conveying is the most common of these two systems, due in part to its relatively straightforward design If designed correctly, a dilute-phase conveying system can provide reliable and flex-...

242 Feeding of pneumatic conveying systems where K 2 is the loss factor for tapered contractions and lies between 004 and 006 for included angles less than 45 176 At an included angle of 25 176 a typical loss factor of K 2 = 005On the basis of the discussions for K 1 it must be noted that there is no need for correcting K 2 Venturi calculations start with the downstream static pressure...